BigSmoke

Smokes your problems, coughs fresh air.

Tag: remote

Programming my friend’s remote

March 6, 2019 /

I built a sound system for a friend, and programmed Philips RC5 remote control into the microcontroller. I recently ordered this remote:

To program:

  • Press TV for 5 seconds until it lights up.
  • Type 15526 as code. Edit: I had to replace it with an almost similar one (a SRP5016; the previous one was SRP5018 apparently). Now it’s 13248. For him that’s enough, but it’s missing one button for another build.

My universal remote programming codes

August 6, 2012 /

Whenever this remote’s battery is loose for a while, it forgets its programming. So, here it is:

For computer, use the TV setting. Press 1 and 3 for a few seconds, then when the light turns on, enter 0677 as code.

For my amp, you have to set the aux mode for a second TV. To do that, press 1 and 6 for a while. Then press 9, 9, 2. Then press TV, then aux. Next step is to enter the TV code. Press aux, then hold 1 and 3. Enter the following code: 0064.

© 2025 BigSmoke

Theme by Anders Noren — Up ↑